Question bank for Practice Applied Mechanics 22203

-

      Question bank for Practice SW-II

Subject: Applied Mechanics  22203 

QU.1) Answer the following questions                   2 Marks Each 

1) Draw FBD of ladder in friction with meaning of each term 

2) State the centroid of semi-circle and show it on the sketch.

3) State Lami’s theorem.

4)  State any two types of beam along with sketch.

5) Differentiate between centroid and centre of gravity.

6) State two laws of static friction


 Amazon Prime 




7) Define coefficient of friction and angle of repose.

8)Define centroid and center of gravity

9)Write relation between resultant and equilibriant.

10)Write two advantages and two disadvantages of friction.


Qu. 2   Solve the following qu.                            4 Marks Each

 A) Calculate the position of centroid from bottom left corner ‘B’ for a retaining wall as shown in Fig.

B) Calculate tension in the strings AB and BC if a weight of 200 N is attached by two strings as shown in Fig

 

C) Calculate coefficient of friction if a block weighing 600 N resting on a rough horizontal plane can be moved by a force of 150 N applied at an angle of 60° with the horizontal.

D) Calculate moment of all forces about point ‘A’ for the force system as shown in Fig

 E) Calculate the position of centroid from bottom left corner ‘B’ for a retaining wall as shown in Fig.



Popular posts from this blog

ENGINEERING DRAWING QUESTION BANK 312311 ,22207

-
Image
              ENGINEERING DRAWING QUESTION BANK 312311 Assignment No. 4, 5   (a)               A square pyramid, side of base 35 mm, axis length 65 mm lying on the HP with all edges of bases are equally inclined to V.P .Its Axis inclined at 45⁰ to HP and parallel to V.P. Draw its projections.    Solution:   (b)                A Square prism of side of base 40 mm and length of axis is 60 mm long is kept on VP on a corner of a base such that its axis makes an angle of 30⁰ to VP and parallel to HP. Draw the projection of prism.                                 (c)                 A cylinder of base 50 mm and axis length 60 mm is lying on the HP with its axis is inclined to VP at 30⁰ and parallel to HP .Draw the projection of a cylinder.      (d)                A cone base 50 mm diameter and axis 55 mm long is resting on H.P on a point of its base. Draw its projections if it base makes an angle of 30⁰ to the H.P and axis is parallel o V.P.   (e)                A cube wit
Read more

Assignments ; Question BANK EDR 312311 ,22207

-
Image
                Assignments & Question BANK  I      Subject : Engineering Drawing   312311         branch : Mechanical engg   Section I QU-1   Fig.- shows the pictorial view of an object.  Draw : (i) Sectional front view along symmetry of the object (ii) L.H.S.V   iii) Top View Use first angle method. ENGINEERING DRAWING VIDEOS   ✋ ENGINEERING MECHANICS VIDEOS QU-2        Fig.- shows isometric view of a CI block. Draw : (i) Sectional F.V. in the X-direction (ii) T.V. (iii) L.H.S.V. QU.3              Fig.  shows isometric view of a machine component.            Draw the following views :  (i) Sectional F.V. looking in the direction of X (Section B – B)        (ii) T.V. QU.4 A line AB, 65 mm long is inclined to HP at an angle of 45º. Its end A is 15 mm above HP and 25 mm infront of VP. Line AB is contained by a vertical plane making an angle of 45º to VP. Draw the projections of line and find inclinations of the line with VP. QU.5)      a) When line is perpendicular to V.P., state
Read more

ENGINEERING DRAWING IMPORTANT QUESTIONS (EDR 312311 & 22307) SEM II

-
Image
                ENGINEERING DRAWING               (EDR 312311 & 22307)  SEM II                       IMPORTANT QUESTIONS (With solution)   ENGINEERING DRAWING VIDEOS   ✋ ENGINEERING MECHANICS VIDEOS ASSIGNMENT : Projection of Solid QU: 1     A pentagonal prism base 25 mm side and axis 60 mm long is standing on a corner of the base on H.P. with its axis inclined at 45 0    to H.P. and parallel to V.P. Draw the projections. Solution: बचत आणि गुंतवणूकीची कला: एक सुरक्षित आर्थिक भविष्य निर्माण करणे    QU. 2  A right circular cone, base 50 mm diameter and axis 60 mm long, is resting on  its apex on H.P. Draw the projection of cone, when the axis is parallel to V.P.  and inclined at 45 0 to H.P.                                            BODY LOTION OFFER             ASSIGNMENT : Sectional Views  ENGINEERING DRAWING VIDEOS   ✋ ENGINEERING MECHANICS VIDEOS QU-1 Fig.- shows the pictorial view of an object.  Draw : (i) Sectional front view along symmetry of the object (ii) L.H.S
Read more